CP3218-0040 CP3218-1600-0020 CP3218-1600-0030 CP3218-1600-0040 Touch Screen Display Replacement

Order each part separately is available

Commissioning

In order to use the panel PC, you must first commission it. The first step is to transport CP3218-0040 CP3218-1600-0020 CP3218-1600-0030 CP3218-1600-0040 Touch Membrane to is operating location and unpack it. This is followed by installing the device in the control cabinet front, connecting the cables and the power supply and finally switching on the panel PC. The device is operated via the touch screen. But you need to notice the damage to Beckhoff Touch Panel CP3218-0040 CP3218-1600-0020 CP3218-1600-0030 CP3218-1600-0040 HMI Touch Glass because operating the touch screen with unsuitable objects may damage the touch screen:

• Operate CP3218-0040 CP3218-1600-0020 CP3218-1600-0030 CP3218-1600-0040 Touch Screen Glass only with bare fingers or wearing suitable gloves.
• If you use gloves, make sure that no hard particles such as metal shavings, glass splinters or similar adhere to the glove.

If you, as the user, require additional protection for Beckhoff HMI CP3218-0040 CP3218-1600-0020 CP3218-1600-0030 CP3218-1600-0040 Touch Screen Display against dirt and scratching, for example due to dirty hands, this can be achieved with a protective film. The film provides short-term protection for a long time. You can either order a protective film individually and fit it yourself retrospectively, or you can order the film for fitting directly. The protective films available for the display size of your device can be found on Vicpas website.