GLC2300-FNCN01 PFXZGLCNFN1 Front Overlay Touch Digitizer

Order each part separately is available

To Prevent GLC2000 GLC2300-FNCN01 PFXZGLCNFN1 Touch Panel Front Overlay GLC Damage:
Avoid restricting the GLC's naturally occurring ventilation, or storing or using the GLC in an environment that is too hot.
Avoid using or storing the GLC in direct sunlight, or in excessively dusty or dirty environments.
Because the GLC is a precision instrument, do not store or use the GLC where a sudden shock or excessive vibration can occur.
Never strike the GLC2300-FNCN01 PFXZGLCNFN1 touch panel with a hard or heavy object, or push on the touch panel with too much force, since it may damage the unit.
If the GLC2300-FNCN01 PFXZGLCNFN1 Protective Film Touch Screen Panel GLC is used in an environment with temperatures and humidity in excess of the allowed range, the GLC may malfunction and/or its useful life may be shortened.
Do not allow water, liquids, metal particles, or charged particles to enter inside the GLC's chassis, since they can cause either a GLC malfunction or an electrical shock.
Do not use this GLC2300-FNCN01 PFXZGLCNFN1 Touch Digitizer Glass Protective Film unit in areas where the temperatures can change drastically, causing condensation to form inside the unit. This can cause the unit to malfunction.
Do not store or use the GLC where chemicals and acids evaporate, or where chemicals and acids are present in the air.
Do not use paint thinner or organic solvents to clean the GLC2300-FNCN01 PFXZGLCNFN1 Front Overlay HMI Panel Glass GLC.
Due to the danger of unforeseen accidents, be sure to back up the GLC's screen data and logic programs regularly.
After turning this unit OFF, be sure to wait a few seconds before turning it ON again. If the unit is started too soon, it may not start up correctly.