VT2-8T VT2-8TB Touch Digitizer Glass Front Overlay

Order each part separately is available

VT2-8T VT2-8TB Touch Screen Panel Front Overlay HMI Ambient temperature/humidity precautions
Pay attention to the following points when installing the VT2-8T VT2-8TB Front Overlay Touch Membrane VT2 inside a control panel.
Do not install the VT2 in a location where the ambient temperature exceeds the 0 to 50C range (0 to 40C on VT2-12F) or the ambient humidity exceeds the 35 to 85%RH range.
If the ambient temperature exceeds the above range, install a forced air cooling fan or air conditioner to keep the ambient temperature within this range.
Allow as much space as possible between the VT2 and surrounding structures and other components to improve maintainability, operability and ventilation.
Do not mount the VT2-8T VT2-8TB HMI Touch Glass Protective Film VT2 directly above equipment (e.g. heaters, transformers, inverters and equipment with large resistance) that generate lots of heat.
Do not use PORT1 (USB) in locations that are subject to vibration or impact. The USB connector is not provided with a locking function, so the USB cable may become loose or disconnected, and disrupt communications.