Keyence VT3-Q5TW Touch Panel Front Overlay Repair

Order each part separately is available

Ambient temperature/humidity precautions
Pay attention to the following points when installing the VT3-Q5TW Protective Film Touchscreen VT3 inside a control panel.
When the ambient temperature is higher than 40C, please use it at a maximum absolute humidity of 85% RH at 40C.
Do not install the VT3-Q5TW Front Overlay Touch Panel VT3 in a location where the ambient temperature exceeds the 0 to 50C, or the ambient humidity exceeds the 35 to 85% RH range.
If the ambient temperature exceeds the above range, install a forced air cooling fan or air conditioner to keep the ambient temperature within this range.
Allow as much space as possible between the VT3-Q5TW HMI Panel Glass Protective Film VT3 and surrounding structures and other components to improve maintainability, operability and ventilation.
Do not mount the VT3-Q5TW Touch Digitizer Overlay VT3 directly above equipment (e.g. heaters, transformers, inverters and equipment with large resistance) that generate lots of heat.
Do not use PORT1 (USB) in locations that are subject to vibration or impact. The USB connector is not provided with a locking function, so the USB cable may become loose or disconnected, and disrupt communications.