1201-256 1201-X251 03 13010773-TW-8 Touchscreen Repair

Cautions

When you've assembled 1201-256 1201-X251 03 13010773-TW-8 Touch Panel, you may encounter the following problems.

About the touchscreen calibration, if you have trouble with it, press and hold anywhere on the screen when HMI starts until it enters touchscreen calibration mode. If the display does not come on within 5 seconds of power up, remove power. In addition, a resettable fuse will protect against overcurrent faults in DC circuit and the resetting will take place after a period of time. Check wiring for proper connections and try to power up again. The system designer should be aware that devices in Controller systems could fail and thereby create an unsafe condition, it will damage the 1201-256 1201-X251 03 13010773-TW-8 Touch Membrane. Furthermore, electrical interference in an operator interface can lead to equipment start-up, which could result in property damage and/or physical injury to the operator.

Tips about cleaning 1201-256 1201-X251 03 13010773-TW-8 Touch Screen Glass: disconnect the equipment from all power outlets before cleaning. Use only a damp cloth for cleaning. Do not use liquid or spray detergents. Never pour any liquid into an opening. This may cause fire or electric shock. After cleaning, you should keep 1201-256 1201-X251 03 13010773-TW-8 Touch Digitizer away from humidity.