IDEC HG3F-FT22TFW HMI Touch Glass Replacement

Operating environment for HG3F-FT22TFW Touchscreen

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC HG3F-FT22TFW Touch Screen Tablet.
5. Where strong ultraviolet rays fall on the HG3F.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC HG3F-FT22TFW HMI Panel Glass is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.

Ambient Temperature of IDEC HG3F-FT22TFW Touch Membrane

The HG3F is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the HG3F. Allow 100mm minimum clearance above and below the HG3F. Do not install the HG3F where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the HG3F-FT22TFW Touch Digitizer Glass in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.