IDEC FT1A-C14KA-B Touch Membrane Replacement

Operating environment for FT1A-C14KA-B Touchscreen

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC FT1A-C14KA-B Touch Screen Tablet.
5. Where strong ultraviolet rays fall on the FT1A.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC FT1A-C14KA-B HMI Panel Glass is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.

Ambient Temperature of IDEC FT1A-C14KA-B Touch Membrane

The FT1A is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the FT1A. Allow 100mm minimum clearance above and below the FT1A. Do not install the FT1A where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the FT1A-C14KA-B Touch Digitizer Glass in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.