IDEC HG1P-ST32ZBFH-B0 Touchscreen Overlay Film Repair

Order each part separately is available

Operating environment for HG1P-ST32ZBFH-B0 Touchscreen Protective Film

1. Where dust, briny air, or iron particles exist.
2. Where oil or chemical splashes for a long time.
3. Where oil mist is filled.
4. Where direct sunlight falls on the IDEC HG1P-ST32ZBFH-B0 Touch Screen Tablet Front Overlay.
5. Where strong ultraviolet rays fall on the Terminal.
6. Where corrosive or combustible gasses exist.
7. Where the IDEC HG1P-ST32ZBFH-B0 Front Overlay HMI Panel Glass is subjected to shocks or vibrations
8. Where condensation occurs due to rapid temperature change.
9. Where high-voltage or arc-generating equipment (electromagnetic contactors or circuit protectors) exists in the vicinity.

Ambient Temperature of IDEC HG1P-ST32ZBFH-B0 Touch Membrane Film Overlay

The HMI is designed to install on a vertical plane so that natural air-cooling is provided. Keep as much space as possible around the HMI. Allow 100mm minimum clearance above and below the HMI. Do not install the Terminal where the ambient temperature exceeds the rated operating ambient temperature range. When mounting the HG1P-ST32ZBFH-B0 Protective Film Touch Digitizer Glass in such locations, provide a forced air-cooling fan or air-conditioner to keep the ambient temperature within the rated temperature range.