Automation Direct FLI-150 FLI-150-TS Touch Digitizer Overlay

Order each part separately is available

The Automation Direct FLI-150 FLI-150-TS Front Overlay Touch Digitizer Glass Monitors display has an embedded microprocessor on the converter card [the electronics that drive the LCD] and has been recently updated with a more powerful chipset. In most cases, the unit will require very little if any user intervention to operate correctly. That is, produce a sharp, stable picture.

The microprocessor in the display has the capability to adjust itself to the computer to which it is attached. This auto-adjustment will take place when the unit is first installed and connected to a computer if the video input changes or the user initiates it. If the picture is not satisfactory, the first step is to allow the unit to attempt to re-adjust itself to your computer.

FLI-150 FLI-150-TS Touchscreen Panel Protective Film Displays Features
The FLI-150(-TS) is capable of displaying 16M (24 Bit) colors in a continuous spectrum. The high-contrast LCD enhances the image with no geometric distortion.
FLI-150(-TS) Series directly accepts an analog 3,4, or 5-wire RGB with separate H/V, composite, or sync on green. This is the standard PC video signal.
The FLI-150(-TS) Series is auto synchronous adjusting the display to the appropriate input between VGA and SXGA (Note: XGA is the displays native mode, SXGA is interpolated).
The FLI 150(-TS) Series is supplied with an Anti-Glare Touch Screen [TS models] or an Anti-Glare impact window on non-touchscreen models.
The FLI-150(-TS) Requires an external 12 VDC power supply such AutomationDirect's PS-MON is required. Turn on the power.

Kernfix supplies Automation Direct FLI-150 FLI-150-TS Front Overlay and Touch Panel with 365 days warranty and support Urgent Worldwide Shipping.