cMT2159X Front Overlay Touch Digitizer Glass Repair

Order each part separately is available

Installation Environment

Firstly, pay attention to the Electrical Environment during install Weintek Weinview cMT X Series cMT2159X Touch Screen Front Overlay. The circuitry is designed to resist the effects of electrical noise. This does not guarantee noise immunity in severe cases. Proper wire routing and grounding will insure proper operation of cMT2159X Protective Film Touch Panel.

Secondly, environmental considerations should be noticed. Ensure cMT2159X Touch Membrane Front Overlay are installed correctly and that the operating limits are adhered to. Avoid installing units in environments with severe mechanical vibrations or shocks. Do not operate the unit in areas with explosion hazards caused by flammable gases, vapors, or dust. It will damage Weinview HMI cMT X Series cMT2159Xn Touch Digitizer Glass Protective Film. Additionally, the unit should not be installed where acid gases, such as sulfur dioxide (SO2), are present. cMT2159X Front Overlay Touch Screen Monitor must be mounted in a vertical position and used on a flat surface enclosure, designed for Pollution Degree 2 environments and dry locations. It operates effectively in relative humidity ranging from 10% to 90% (non-condensing).

Be careful and use dry cloths to clean cMT2159X Touch Screen Film Protective Film. Do not use liquid or spray detergents for cleaning. Protection impairment if used in a manner not specified by the manufacturer.