HMI5071L Touchscreen LCD Housing Front Overlay Repair

Order each part separately is available

Cautions

When you've assembled Weintek Weinview HMI5071L Touch Screen, Protective Film, LCD Display, Back Cover, Front Cover, Gasket, Mounting Brackets, Screws and Power Supply Connector, you may encounter the following problems.

About the touchscreen calibration, if you have trouble with it, press and hold anywhere on the screen when HMI starts until it enters touchscreen calibration mode. If the display does not come on within 5 seconds of power up, remove power. In addition, a resettable fuse will protect against overcurrent faults in DC circuit and the resetting will take place after a period of time. Check wiring for proper connections and try to power up again. The system designer should be aware that devices in Controller systems could fail and thereby create an unsafe condition, it will damage the HMI5071L Mounting Brackets, Plastic Shell, Power Supply Connector, Touch Panel, LCD Screen, Screws, Gasket and Protective Film. Furthermore, electrical interference in an operator interface can lead to equipment start-up, which could result in property damage and/or physical injury to the operator.

Tips about cleaning HMI Weinview Advanced HMIs HMI5071L Front Cover, Back Cover, Protective Film, LCD Display, Touch Screen, Gasket, Screws, Mounting Brackets and Power Supply Connector: disconnect the equipment from all power outlets before cleaning. Use only a damp cloth for cleaning. Do not use liquid or spray detergents. Never pour any liquid into an opening. This may cause fire or electric shock. After cleaning, you should keep HMI5071L LCD Display Screen, Front Overlay, Power Supply Connector, Screws, Front Case, Gasket, Back Cover, Mounting Brackets and Touch Screen Monitor away from humidity.