M2I XTOP Products Normal/EX TOPRX0800VD Overlay Screen

Order each part separately is available

Precautions on Install XTOP Products Normal/EX Model TOPRX0800VD Touch Screen Front Overlay

Do not install the location which exceeds allowed temperature. Product can be damaged or shorten the life. Especially Install environment of TOPRX0800VD Protective Film HMI Panel Glass as below should be avoided.
1. Do not Install product to the place which the ambient temperature is out of limits, from 0C to 50C or on the surface of control board which high pressure equipment is installed.
2. Do not install C TOP TOPRX0800VD Protective Film Touch Membrane to the place where strong shock or vibration continuously have impacted on product.
3. The space between back of product and back of control board must be more than 100mm for maintenance and ventilation.
4. Do not storage and operate TOPRX0800VD Touch Screen Glass Front Overlay in the place in direct sunlight. By the strong ultraviolet rays can degrade the quality of LCD Displays.

General Precautions

1. Do not strike the TOPRX0800VD Protective Film Touch Screen with a hard or pointed object (such as drill, driver, pen, etc.)or press on the touch screen with too much force. It may cause malfunction of touch panel by damaged front sheet.
2. Do not use or store in severe vibration environment.
3. Do not allow water, liquids, foreign substances such as metal powder into TOPRX0800VD Touch Panel Front Overlay product. It can damage product or cause malfunction by an electric shock.
4. Do not allow water, liquids, foreign substances like metal powder into the space between protection sheet and front sheet. It may cause malfunction of touch panel and indistinct screen display.
5. Use a cellular phone or walky-talky more than 30cm (11.81 inch)away from TOPRX0800VD Touch Digitizer Protective Film product.